SCM - Long Spring Traps

#1 Long Spring Trap

• Frame - One-piece construction, 1/8" thick steel.
• Pan - One-piece construction, rectangular style with crimped bolt and nut.
• Jaw - Four-inch spread.
• Chain - #1/0 double link with one swivel point, ring and drowner.
• Spring - Heavy duty, heat-treated spring steel.
• Weight - 12.16 ounces

#11 Long Spring Trap

• Frame - One-piece construction, 1/8" thick steel with center mounted chain.
• Pan - One-piece construction, rectangular style with crimped bolt and nut.
• Standard Jaw - Four-inch spread.
• Double Jaw - Four-inch spread.
• Offset Double Jaw - Four-inch spread, down pan stop Installed
• Chain - #2/0 double link with two swivel points, ring and drowner.
• Springs - Heavy duty, heat-treated spring steel.
• Weight - 1 pound .5 ounces

#1-1/2 Long Spring Trap

• Frame - Two-piece construction, 1/8" thick x 7/8" wide and riveted.
• Pan Post - Welded through the cross.
• Jaw - 4-3/4" spread.
• Chain - #1/0 double link with one swivel point, ring and drowner.
• Spring - Heavy duty, heat-treated spring steel.
• Pan - Two-piece construction with crimped bolt and nut.
• Weight - 1 pound 2.26 ounces

#2 Long Spring Trap

• Frame - Two-piece construction, 1/8" thick x 7/8" wide and riveted.
• Pan Post - Welded through the cross.
• Jaw - 4-15/16" spread.
• Chain - #2/0 double link with one swivel point, ring and drowner.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - Two-piece construction with crimped bolt and nut.
• Weight - 1 pound 6.24 ounces

#3 Long Spring Trap

• Frame - Two-piece construction, 1/8" thick x 1" wide; reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 5-13/16" spread. 5/32" x 9/16" with corner radius to prevent cutting.
• Offset Jaw - 6" spread. Face averages nearly twice that of the standard jaw.
• Chain - #2 machine chain, twist link, center mounted with 3 swivel points.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - One-piece construction with visual dog engagement and crimped stainless steel bolt and brass nut.
• Weight - 2 pounds 4 ounces

#4 Long Spring Trap

• Frame - Two-piece construction, 1/8" thick x 1" wide; reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 6-5/16" spread. 5/32" x 9/16" with corner radius to prevent cutting.
• Offset Jaw - 6-1/2" spread. Face averages nearly twice that of the standard jaw.
• Chain - #2 machine chain, twist link, center mounted with 3 swivel points.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - One-piece construction with visual dog engagement and crimped stainless steel bolt and brass nut.
• Weight - 2 pounds 6.56 ounces

#4½ Long Spring Beaver Trap

• Frame - 2 pc, 3/16" thick x 1-¼ wide. Chain is center mounted with reinforced chain strap & 1¼ D-Ring
• Cross - 1-piece 3/16" thick with staked pan post.
• Standard Jaw - 7-½" spread. ¼" thick x ¾" wide.
• Offset Jaw - 7-½" spread. ¼" thk x ¾" wide with 1/8" cut in offset.
• Chain - 3/16 Proof Coil Chain, w/3 swivel points (welded "J" hooks)
• Pan - Straddle Pan with extra gussets for strength and visual Dog Engagement with a Stainless Steel Crimped Bolt & Brass Nut
• Springs - 10 gauge Heavy Duty, Heat-treated Spring Steel, Purposely made it fold inside the frame for easy carrying.
• Weight - 4 pounds 7 ounces

#1 Long Spring Guard Trap

• Frame - Two-piece construction, 1/8" thick x 1" wide
• Bail Spring - Stainless Steel
• Jaw - 4 x 4-1/2" spread
• Chain - #1/0 Double Link, with 1 swivel point, ring attached to a delay guard.
• Spring - .060 thick, heat-treated spring steel with dimples on each side of the spring eye to allow the spring to set left or right handed.
• Pan - One-piece construction, with extended legs to allow easy pan to dog engagement.
• Weight - 13-1/4 ounces.