













Traps |
Home |
• |
• |
Accessories |
Tips & Information |
• |
Suppliers |
• |
#6 Griz Trap Hot Forged Coil Spring Bear Trap This custom-made bear trap has a 16-1/2" jaw spread with teeth, a center mounted chain with double swivel and ring. The 6-1/2" pan has raised lettering. Trap comes with a Certificate of Authentication. The Griz is available in both 2-coil (weighing 38-pounds) and 4-coil (weighing 43 pounds) versions. A MUST for every collection. This bear trap is strictly made to order. |
Ye Ole' Griz History This coil spring was about two to three years in the making. It took our designer a lot of rocks in his rocking chair before we ever started the first piece. We tested the limits of our imagination and our equipment. In fact, within about 15 minutes of us displaying the trap at the first convention, a gentleman walked up and asked if we were going to "four coil it." Well, we just couldn't resist the challenge. To date, there have been 236 2-coils sold. Of that number, 210 have the 2000 stamped on the pan, one of which is without teeth. At present, there are 19 traps sold with stock pans. We have made/sold only 11 4-coils. No collection is complete without one, and every trapper needs a dozen! |
Disclaimer: This Bear Trap, although fully operational, is not intended to be set or used.
All Bear Traps are extremely dangerous and SCM will not be held responsible
for any mis-use or loss of limb with this trap. These traps were strictly
designed as Commemorative Collector's Traps. |
Copyright©2004-08 by Sleepy Creek Mfg., Inc. - All Rights Reserved Website by Hawk Mountain Designs |
459 Duckwall Rd., Berkeley Springs, WV 25411 • Phone 304-258-9175
• Fax 304-258-8694 |
Order Directly From Us! You can now order the #6 Griz Collector Trap directly from Sleepy Creek Manufacturing. #6 Griz 2-coil - $400 plus $25 shipping #6 Griz 4-coil - Discontinued Click Here for our printable order form. |
Collector Traps |
This is a pdf file, which opens with Adobe Acrobat |
#5 Wolf Trap • FRAME - 2-piece, 3/16" thick x 1 ¼" wide. With reinforced D-Ring Chain Strap and 1¼" D-Ring • CROSS - 1-piece, 3/16" thick w/ staked pan post, and a adjustable pan stop, serialized on the end. (#'s 0001 - 0452) • OFF-SET JAW - 9" Spread, ¼" thk x 7/8" wide, w/ 3/8" cut in offset & teeth. Jaws are riveted between the chain strap & frame. • CHAIN - #2/0 Twist Link Machine Chain, Self-colored, w/4 swivel points & ring. Lift tested to 440 lbs. • PAN - 1/8" x 3¼ Straddle Pan w/anti-lift stops & visual dog engagement. Attached with ¼ - 20 SS Bolt & Nyloc Nut. • SPRINGS - 135" thick, Heat-treated Spring Steel. Springs fold inside frame for easy carry and have Wolf stamped on each spring. • WEIGHT - 7 pounds 6 ounces Target Species: Wolf, Mountain Lion Order Directly From Us! Order the #5 Wolf Collector Trap directly from Sleepy Creek Manufacturing. Click Here for our printable order form. Serial Numbers #11 and over - $104.50*, ** Serial Number #10 - $150 Serial Number #9 - $175 Serial Number #8 - $200 Serial Number #7 - $225 Serial Number #6 - $250 Serial Number #5 - $275 Serial Number #4 - $300 Serial Number #3 - $400 Serial Number #2 - $500 * - Includes shipping in 48 states. Alaska & Canada orders include shipping to port of export. Customer to pay balance. ** - Add $10 to price if requesting a specific serial number. |
#6 Griz Trap |
Photo shows 4-coil model |
#6 Griz Trap |
Photo shows 4-coil model |
#5 Wolf Trap |
Warning: Because this trap is intended for land trapping only. The Springs have been tempered
to maximum hardness. They may break if used in water sets. |
Our order form is a pdf file, which opens with Adobe Acrobat |
Photo shows the trap prior to being stamped with the wolf image on each spring. |
SOLD |
SOLD |
SOLD |
SOLD |
SOLD |
SOLD |
SOLD |